Selasa, 12 Maret 2013

Home » , » Daftar error pada windows 500 - 999

Daftar error pada windows 500 - 999

By DTF 20.00  No comments

Daftar error pada windows 500 - 999


The System Error Codes are very broad. Each one can occur in one of many hundreds of locations in the system. Consequently the descriptions of these codes cannot be very specific. Use of these codes requires some amount of investigation and analysis. You need to note both the programmatic and the run-time context in which these errors occur. Because these codes are defined in WinError.h for anyone to use, sometimes the codes are returned by non-system software. Sometimes the code is returned by a function deep in the stack and far removed from your code that is handling the error.
The following list describes system error codes (errors 500 to 999). They are returned by the GetLastError function when many functions fail. To retrieve the description text for the error in your application, use the FormatMessage function with the FORMAT_MESSAGE_FROM_SYSTEM flag.
ERROR_USER_PROFILE_LOAD
500 (0x1F4)
User profile cannot be loaded.
ERROR_ARITHMETIC_OVERFLOW
534 (0x216)
Arithmetic result exceeded 32 bits.
ERROR_PIPE_CONNECTED
535 (0x217)
There is a process on other end of the pipe.
ERROR_PIPE_LISTENING
536 (0x218)
Waiting for a process to open the other end of the pipe.
ERROR_VERIFIER_STOP
537 (0x219)
Application verifier has found an error in the current process.
ERROR_ABIOS_ERROR
538 (0x21A)
An error occurred in the ABIOS subsystem.
ERROR_WX86_WARNING
539 (0x21B)
A warning occurred in the WX86 subsystem.
ERROR_WX86_ERROR
540 (0x21C)
An error occurred in the WX86 subsystem.
ERROR_TIMER_NOT_CANCELED
541 (0x21D)
An attempt was made to cancel or set a timer that has an associated APC and the subject thread is not the thread that originally set the timer with an associated APC routine.
ERROR_UNWIND
542 (0x21E)
Unwind exception code.
ERROR_BAD_STACK
543 (0x21F)
An invalid or unaligned stack was encountered during an unwind operation.
ERROR_INVALID_UNWIND_TARGET
544 (0x220)
An invalid unwind target was encountered during an unwind operation.
ERROR_INVALID_PORT_ATTRIBUTES
545 (0x221)
Invalid Object Attributes specified to NtCreatePort or invalid Port Attributes specified to NtConnectPort
ERROR_PORT_MESSAGE_TOO_LONG
546 (0x222)
Length of message passed to NtRequestPort or NtRequestWaitReplyPort was longer than the maximum message allowed by the port.
ERROR_INVALID_QUOTA_LOWER
547 (0x223)
An attempt was made to lower a quota limit below the current usage.
ERROR_DEVICE_ALREADY_ATTACHED
548 (0x224)
An attempt was made to attach to a device that was already attached to another device.
ERROR_INSTRUCTION_MISALIGNMENT
549 (0x225)
An attempt was made to execute an instruction at an unaligned address and the host system does not support unaligned instruction references.
ERROR_PROFILING_NOT_STARTED
550 (0x226)
Profiling not started.
ERROR_PROFILING_NOT_STOPPED
551 (0x227)
Profiling not stopped.
ERROR_COULD_NOT_INTERPRET
552 (0x228)
The passed ACL did not contain the minimum required information.
ERROR_PROFILING_AT_LIMIT
553 (0x229)
The number of active profiling objects is at the maximum and no more may be started.
ERROR_CANT_WAIT
554 (0x22A)
Used to indicate that an operation cannot continue without blocking for I/O.
ERROR_CANT_TERMINATE_SELF
555 (0x22B)
Indicates that a thread attempted to terminate itself by default (called NtTerminateThread with NULL) and it was the last thread in the current process.
ERROR_UNEXPECTED_MM_CREATE_ERR
556 (0x22C)
If an MM error is returned which is not defined in the standard FsRtl filter, it is converted to one of the following errors which is guaranteed to be in the filter. In this case information is lost, however, the filter correctly handles the exception.
ERROR_UNEXPECTED_MM_MAP_ERROR
557 (0x22D)
If an MM error is returned which is not defined in the standard FsRtl filter, it is converted to one of the following errors which is guaranteed to be in the filter. In this case information is lost, however, the filter correctly handles the exception.
ERROR_UNEXPECTED_MM_EXTEND_ERR
558 (0x22E)
If an MM error is returned which is not defined in the standard FsRtl filter, it is converted to one of the following errors which is guaranteed to be in the filter. In this case information is lost, however, the filter correctly handles the exception.
ERROR_BAD_FUNCTION_TABLE
559 (0x22F)
A malformed function table was encountered during an unwind operation.
ERROR_NO_GUID_TRANSLATION
560 (0x230)
Indicates that an attempt was made to assign protection to a file system file or directory and one of the SIDs in the security descriptor could not be translated into a GUID that could be stored by the file system. This causes the protection attempt to fail, which may cause a file creation attempt to fail.
ERROR_INVALID_LDT_SIZE
561 (0x231)
Indicates that an attempt was made to grow an LDT by setting its size, or that the size was not an even number of selectors.
ERROR_INVALID_LDT_OFFSET
563 (0x233)
Indicates that the starting value for the LDT information was not an integral multiple of the selector size.
ERROR_INVALID_LDT_DESCRIPTOR
564 (0x234)
Indicates that the user supplied an invalid descriptor when trying to set up Ldt descriptors.
ERROR_TOO_MANY_THREADS
565 (0x235)
Indicates a process has too many threads to perform the requested action. For example, assignment of a primary token may only be performed when a process has zero or one threads.
ERROR_THREAD_NOT_IN_PROCESS
566 (0x236)
An attempt was made to operate on a thread within a specific process, but the thread specified is not in the process specified.
ERROR_PAGEFILE_QUOTA_EXCEEDED
567 (0x237)
Page file quota was exceeded.
ERROR_LOGON_SERVER_CONFLICT
568 (0x238)
The Netlogon service cannot start because another Netlogon service running in the domain conflicts with the specified role.
ERROR_SYNCHRONIZATION_REQUIRED
569 (0x239)
The SAM database on a Windows Server is significantly out of synchronization with the copy on the Domain Controller. A complete synchronization is required.
ERROR_NET_OPEN_FAILED
570 (0x23A)
The NtCreateFile API failed. This error should never be returned to an application, it is a place holder for the Windows Lan Manager Redirector to use in its internal error mapping routines.
ERROR_IO_PRIVILEGE_FAILED
571 (0x23B)
{Privilege Failed} The I/O permissions for the process could not be changed.
ERROR_CONTROL_C_EXIT
572 (0x23C)
{Application Exit by CTRL+C} The application terminated as a result of a CTRL+C.
ERROR_MISSING_SYSTEMFILE
573 (0x23D)
{Missing System File} The required system file %hs is bad or missing.
ERROR_UNHANDLED_EXCEPTION
574 (0x23E)
{Application Error} The exception %s (0x%08lx) occurred in the application at location 0x%08lx.
ERROR_APP_INIT_FAILURE
575 (0x23F)
{Application Error} The application was unable to start correctly (0x%lx). Click OK to close the application.
ERROR_PAGEFILE_CREATE_FAILED
576 (0x240)
{Unable to Create Paging File} The creation of the paging file %hs failed (%lx). The requested size was %ld.
ERROR_INVALID_IMAGE_HASH
577 (0x241)
Windows cannot verify the digital signature for this file. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source.
ERROR_NO_PAGEFILE
578 (0x242)
{No Paging File Specified} No paging file was specified in the system configuration.
ERROR_ILLEGAL_FLOAT_CONTEXT
579 (0x243)
{EXCEPTION} A real-mode application issued a floating-point instruction and floating-point hardware is not present.
ERROR_NO_EVENT_PAIR
580 (0x244)
An event pair synchronization operation was performed using the thread specific client/server event pair object, but no event pair object was associated with the thread.
ERROR_DOMAIN_CTRLR_CONFIG_ERROR
581 (0x245)
A Windows Server has an incorrect configuration.
ERROR_ILLEGAL_CHARACTER
582 (0x246)
An illegal character was encountered. For a multi-byte character set this includes a lead byte without a succeeding trail byte. For the Unicode character set this includes the characters 0xFFFF and 0xFFFE.
ERROR_UNDEFINED_CHARACTER
583 (0x247)
The Unicode character is not defined in the Unicode character set installed on the system.
ERROR_FLOPPY_VOLUME
584 (0x248)
The paging file cannot be created on a floppy diskette.
ERROR_BIOS_FAILED_TO_CONNECT_INTERRUPT
585 (0x249)
The system BIOS failed to connect a system interrupt to the device or bus for which the device is connected.
ERROR_BACKUP_CONTROLLER
586 (0x24A)
This operation is only allowed for the Primary Domain Controller of the domain.
ERROR_MUTANT_LIMIT_EXCEEDED
587 (0x24B)
An attempt was made to acquire a mutant such that its maximum count would have been exceeded.
ERROR_FS_DRIVER_REQUIRED
588 (0x24C)
A volume has been accessed for which a file system driver is required that has not yet been loaded.
ERROR_CANNOT_LOAD_REGISTRY_FILE
589 (0x24D)
{Registry File Failure} The registry cannot load the hive (file): %hs or its log or alternate. It is corrupt, absent, or not writable.
ERROR_DEBUG_ATTACH_FAILED
590 (0x24E)
{Unexpected Failure in DebugActiveProcess} An unexpected failure occurred while processing aDebugActiveProcess API request. You may choose OK to terminate the process, or Cancel to ignore the error.
ERROR_SYSTEM_PROCESS_TERMINATED
591 (0x24F)
{Fatal System Error} The %hs system process terminated unexpectedly with a status of 0x%08x (0x%08x 0x%08x). The system has been shut down.
ERROR_DATA_NOT_ACCEPTED
592 (0x250)
{Data Not Accepted} The TDI client could not handle the data received during an indication.
ERROR_VDM_HARD_ERROR
593 (0x251)
NTVDM encountered a hard error.
ERROR_DRIVER_CANCEL_TIMEOUT
594 (0x252)
{Cancel Timeout} The driver %hs failed to complete a cancelled I/O request in the allotted time.
ERROR_REPLY_MESSAGE_MISMATCH
595 (0x253)
{Reply Message Mismatch} An attempt was made to reply to an LPC message, but the thread specified by the client ID in the message was not waiting on that message.
ERROR_LOST_WRITEBEHIND_DATA
596 (0x254)
{Delayed Write Failed} Windows was unable to save all the data for the file %hs. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere.
ERROR_CLIENT_SERVER_PARAMETERS_INVALID
597 (0x255)
The parameter(s) passed to the server in the client/server shared memory window were invalid. Too much data may have been put in the shared memory window.
ERROR_NOT_TINY_STREAM
598 (0x256)
The stream is not a tiny stream.
ERROR_STACK_OVERFLOW_READ
599 (0x257)
The request must be handled by the stack overflow code.
ERROR_CONVERT_TO_LARGE
600 (0x258)
Internal OFS status codes indicating how an allocation operation is handled. Either it is retried after the containing onode is moved or the extent stream is converted to a large stream.
ERROR_FOUND_OUT_OF_SCOPE
601 (0x259)
The attempt to find the object found an object matching by ID on the volume but it is out of the scope of the handle used for the operation.
ERROR_ALLOCATE_BUCKET
602 (0x25A)
The bucket array must be grown. Retry transaction after doing so.
ERROR_MARSHALL_OVERFLOW
603 (0x25B)
The user/kernel marshalling buffer has overflowed.
ERROR_INVALID_VARIANT
604 (0x25C)
The supplied variant structure contains invalid data.
ERROR_BAD_COMPRESSION_BUFFER
605 (0x25D)
The specified buffer contains ill-formed data.
ERROR_AUDIT_FAILED
606 (0x25E)
{Audit Failed} An attempt to generate a security audit failed.
ERROR_TIMER_RESOLUTION_NOT_SET
607 (0x25F)
The timer resolution was not previously set by the current process.
ERROR_INSUFFICIENT_LOGON_INFO
608 (0x260)
There is insufficient account information to log you on.
ERROR_BAD_DLL_ENTRYPOINT
609 (0x261)
{Invalid DLL Entrypoint} The dynamic link library %hs is not written correctly. The stack pointer has been left in an inconsistent state. The entrypoint should be declared as WINAPI or STDCALL. Select YES to fail the DLL load. Select NO to continue execution. Selecting NO may cause the application to operate incorrectly.
ERROR_BAD_SERVICE_ENTRYPOINT
610 (0x262)
{Invalid Service Callback Entrypoint} The %hs service is not written correctly. The stack pointer has been left in an inconsistent state. The callback entrypoint should be declared as WINAPI or STDCALL. Selecting OK will cause the service to continue operation. However, the service process may operate incorrectly.
ERROR_IP_ADDRESS_CONFLICT1
611 (0x263)
There is an IP address conflict with another system on the network.
ERROR_IP_ADDRESS_CONFLICT2
612 (0x264)
There is an IP address conflict with another system on the network.
ERROR_REGISTRY_QUOTA_LIMIT
613 (0x265)
{Low On Registry Space} The system has reached the maximum size allowed for the system part of the registry. Additional storage requests will be ignored.
ERROR_NO_CALLBACK_ACTIVE
614 (0x266)
A callback return system service cannot be executed when no callback is active.
ERROR_PWD_TOO_SHORT
615 (0x267)
The password provided is too short to meet the policy of your user account. Please choose a longer password.
ERROR_PWD_TOO_RECENT
616 (0x268)
The policy of your user account does not allow you to change passwords too frequently. This is done to prevent users from changing back to a familiar, but potentially discovered, password. If you feel your password has been compromised then please contact your administrator immediately to have a new one assigned.
ERROR_PWD_HISTORY_CONFLICT
617 (0x269)
You have attempted to change your password to one that you have used in the past. The policy of your user account does not allow this. Please select a password that you have not previously used.
ERROR_UNSUPPORTED_COMPRESSION
618 (0x26A)
The specified compression format is unsupported.
ERROR_INVALID_HW_PROFILE
619 (0x26B)
The specified hardware profile configuration is invalid.
ERROR_INVALID_PLUGPLAY_DEVICE_PATH
620 (0x26C)
The specified Plug and Play registry device path is invalid.
ERROR_QUOTA_LIST_INCONSISTENT
621 (0x26D)
The specified quota list is internally inconsistent with its descriptor.
ERROR_EVALUATION_EXPIRATION
622 (0x26E)
{Windows Evaluation Notification} The evaluation period for this installation of Windows has expired. This system will shutdown in 1 hour. To restore access to this installation of Windows, please upgrade this installation using a licensed distribution of this product.
ERROR_ILLEGAL_DLL_RELOCATION
623 (0x26F)
{Illegal System DLL Relocation} The system DLL %hs was relocated in memory. The application will not run properly. The relocation occurred because the DLL %hs occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL.
ERROR_DLL_INIT_FAILED_LOGOFF
624 (0x270)
{DLL Initialization Failed} The application failed to initialize because the window station is shutting down.
ERROR_VALIDATE_CONTINUE
625 (0x271)
The validation process needs to continue on to the next step.
ERROR_NO_MORE_MATCHES
626 (0x272)
There are no more matches for the current index enumeration.
ERROR_RANGE_LIST_CONFLICT
627 (0x273)
The range could not be added to the range list because of a conflict.
ERROR_SERVER_SID_MISMATCH
628 (0x274)
The server process is running under a SID different than that required by client.
ERROR_CANT_ENABLE_DENY_ONLY
629 (0x275)
A group marked use for deny only cannot be enabled.
ERROR_FLOAT_MULTIPLE_FAULTS
630 (0x276)
{EXCEPTION} Multiple floating point faults.
ERROR_FLOAT_MULTIPLE_TRAPS
631 (0x277)
{EXCEPTION} Multiple floating point traps.
ERROR_NOINTERFACE
632 (0x278)
The requested interface is not supported.
ERROR_DRIVER_FAILED_SLEEP
633 (0x279)
{System Standby Failed} The driver %hs does not support standby mode. Updating this driver may allow the system to go to standby mode.
ERROR_CORRUPT_SYSTEM_FILE
634 (0x27A)
The system file %1 has become corrupt and has been replaced.
ERROR_COMMITMENT_MINIMUM
635 (0x27B)
{Virtual Memory Minimum Too Low} Your system is low on virtual memory. Windows is increasing the size of your virtual memory paging file. During this process, memory requests for some applications may be denied. For more information, see Help.
ERROR_PNP_RESTART_ENUMERATION
636 (0x27C)
A device was removed so enumeration must be restarted.
ERROR_SYSTEM_IMAGE_BAD_SIGNATURE
637 (0x27D)
{Fatal System Error} The system image %s is not properly signed. The file has been replaced with the signed file. The system has been shut down.
ERROR_PNP_REBOOT_REQUIRED
638 (0x27E)
Device will not start without a reboot.
ERROR_INSUFFICIENT_POWER
639 (0x27F)
There is not enough power to complete the requested operation.
ERROR_MULTIPLE_FAULT_VIOLATION
640 (0x280)
ERROR_MULTIPLE_FAULT_VIOLATION
ERROR_SYSTEM_SHUTDOWN
641 (0x281)
The system is in the process of shutting down.
ERROR_PORT_NOT_SET
642 (0x282)
An attempt to remove a processes DebugPort was made, but a port was not already associated with the process.
ERROR_DS_VERSION_CHECK_FAILURE
643 (0x283)
This version of Windows is not compatible with the behavior version of directory forest, domain or domain controller.
ERROR_RANGE_NOT_FOUND
644 (0x284)
The specified range could not be found in the range list.
ERROR_NOT_SAFE_MODE_DRIVER
646 (0x286)
The driver was not loaded because the system is booting into safe mode.
ERROR_FAILED_DRIVER_ENTRY
647 (0x287)
The driver was not loaded because it failed its initialization call.
ERROR_DEVICE_ENUMERATION_ERROR
648 (0x288)
The "%hs" encountered an error while applying power or reading the device configuration. This may be caused by a failure of your hardware or by a poor connection.
ERROR_MOUNT_POINT_NOT_RESOLVED
649 (0x289)
The create operation failed because the name contained at least one mount point which resolves to a volume to which the specified device object is not attached.
ERROR_INVALID_DEVICE_OBJECT_PARAMETER
650 (0x28A)
The device object parameter is either not a valid device object or is not attached to the volume specified by the file name.
ERROR_MCA_OCCURED
651 (0x28B)
A Machine Check Error has occurred. Please check the system eventlog for additional information.
ERROR_DRIVER_DATABASE_ERROR
652 (0x28C)
There was error [%2] processing the driver database.
ERROR_SYSTEM_HIVE_TOO_LARGE
653 (0x28D)
System hive size has exceeded its limit.
ERROR_DRIVER_FAILED_PRIOR_UNLOAD
654 (0x28E)
The driver could not be loaded because a previous version of the driver is still in memory.
ERROR_VOLSNAP_PREPARE_HIBERNATE
655 (0x28F)
{Volume Shadow Copy Service} Please wait while the Volume Shadow Copy Service prepares volume %hs for hibernation.
ERROR_HIBERNATION_FAILURE
656 (0x290)
The system has failed to hibernate (The error code is %hs). Hibernation will be disabled until the system is restarted.
ERROR_PWD_TOO_LONG
657 (0x291)
The password provided is too long to meet the policy of your user account. Please choose a shorter password.
ERROR_FILE_SYSTEM_LIMITATION
665 (0x299)
The requested operation could not be completed due to a file system limitation.
ERROR_ASSERTION_FAILURE
668 (0x29C)
An assertion failure has occurred.
ERROR_ACPI_ERROR
669 (0x29D)
An error occurred in the ACPI subsystem.
ERROR_WOW_ASSERTION
670 (0x29E)
WOW Assertion Error.
ERROR_PNP_BAD_MPS_TABLE
671 (0x29F)
A device is missing in the system BIOS MPS table. This device will not be used. Please contact your system vendor for system BIOS update.
ERROR_PNP_TRANSLATION_FAILED
672 (0x2A0)
A translator failed to translate resources.
ERROR_PNP_IRQ_TRANSLATION_FAILED
673 (0x2A1)
A IRQ translator failed to translate resources.
ERROR_PNP_INVALID_ID
674 (0x2A2)
Driver %2 returned invalid ID for a child device (%3).
ERROR_WAKE_SYSTEM_DEBUGGER
675 (0x2A3)
{Kernel Debugger Awakened} the system debugger was awakened by an interrupt.
ERROR_HANDLES_CLOSED
676 (0x2A4)
{Handles Closed} Handles to objects have been automatically closed as a result of the requested operation.
ERROR_EXTRANEOUS_INFORMATION
677 (0x2A5)
{Too Much Information} The specified access control list (ACL) contained more information than was expected.
ERROR_RXACT_COMMIT_NECESSARY
678 (0x2A6)
This warning level status indicates that the transaction state already exists for the registry sub-tree, but that a transaction commit was previously aborted. The commit has NOT been completed, but has not been rolled back either (so it may still be committed if desired).
ERROR_MEDIA_CHECK
679 (0x2A7)
{Media Changed} The media may have changed.
ERROR_GUID_SUBSTITUTION_MADE
680 (0x2A8)
{GUID Substitution} During the translation of a global identifier (GUID) to a Windows security ID (SID), no administratively-defined GUID prefix was found. A substitute prefix was used, which will not compromise system security. However, this may provide a more restrictive access than intended.
ERROR_STOPPED_ON_SYMLINK
681 (0x2A9)
The create operation stopped after reaching a symbolic link.
ERROR_LONGJUMP
682 (0x2AA)
A long jump has been executed.
ERROR_PLUGPLAY_QUERY_VETOED
683 (0x2AB)
The Plug and Play query operation was not successful.
ERROR_UNWIND_CONSOLIDATE
684 (0x2AC)
A frame consolidation has been executed.
ERROR_REGISTRY_HIVE_RECOVERED
685 (0x2AD)
{Registry Hive Recovered} Registry hive (file): %hs was corrupted and it has been recovered. Some data might have been lost.
ERROR_DLL_MIGHT_BE_INSECURE
686 (0x2AE)
The application is attempting to run executable code from the module %hs. This may be insecure. An alternative, %hs, is available. Should the application use the secure module %hs?
ERROR_DLL_MIGHT_BE_INCOMPATIBLE
687 (0x2AF)
The application is loading executable code from the module %hs. This is secure, but may be incompatible with previous releases of the operating system. An alternative, %hs, is available. Should the application use the secure module %hs?
ERROR_DBG_EXCEPTION_NOT_HANDLED
688 (0x2B0)
Debugger did not handle the exception.
ERROR_DBG_REPLY_LATER
689 (0x2B1)
Debugger will reply later.
ERROR_DBG_UNABLE_TO_PROVIDE_HANDLE
690 (0x2B2)
Debugger cannot provide handle.
ERROR_DBG_TERMINATE_THREAD
691 (0x2B3)
Debugger terminated thread.
ERROR_DBG_TERMINATE_PROCESS
692 (0x2B4)
Debugger terminated process.
ERROR_DBG_CONTROL_C
693 (0x2B5)
Debugger got control C.
ERROR_DBG_PRINTEXCEPTION_C
694 (0x2B6)
Debugger printed exception on control C.
ERROR_DBG_RIPEXCEPTION
695 (0x2B7)
Debugger received RIP exception.
ERROR_DBG_CONTROL_BREAK
696 (0x2B8)
Debugger received control break.
ERROR_DBG_COMMAND_EXCEPTION
697 (0x2B9)
Debugger command communication exception.
ERROR_OBJECT_NAME_EXISTS
698 (0x2BA)
{Object Exists} An attempt was made to create an object and the object name already existed.
ERROR_THREAD_WAS_SUSPENDED
699 (0x2BB)
{Thread Suspended} A thread termination occurred while the thread was suspended. The thread was resumed, and termination proceeded.
ERROR_IMAGE_NOT_AT_BASE
700 (0x2BC)
{Image Relocated} An image file could not be mapped at the address specified in the image file. Local fixups must be performed on this image.
ERROR_RXACT_STATE_CREATED
701 (0x2BD)
This informational level status indicates that a specified registry sub-tree transaction state did not yet exist and had to be created.
ERROR_SEGMENT_NOTIFICATION
702 (0x2BE)
{Segment Load} A virtual DOS machine (VDM) is loading, unloading, or moving an MS-DOS or Win16 program segment image. An exception is raised so a debugger can load, unload or track symbols and breakpoints within these 16-bit segments.
ERROR_BAD_CURRENT_DIRECTORY
703 (0x2BF)
{Invalid Current Directory} The process cannot switch to the startup current directory %hs. Select OK to set current directory to %hs, or select CANCEL to exit.
ERROR_FT_READ_RECOVERY_FROM_BACKUP
704 (0x2C0)
{Redundant Read} To satisfy a read request, the NT fault-tolerant file system successfully read the requested data from a redundant copy. This was done because the file system encountered a failure on a member of the fault-tolerant volume, but was unable to reassign the failing area of the device.
ERROR_FT_WRITE_RECOVERY
705 (0x2C1)
{Redundant Write} To satisfy a write request, the NT fault-tolerant file system successfully wrote a redundant copy of the information. This was done because the file system encountered a failure on a member of the fault-tolerant volume, but was not able to reassign the failing area of the device.
ERROR_IMAGE_MACHINE_TYPE_MISMATCH
706 (0x2C2)
{Machine Type Mismatch} The image file %hs is valid, but is for a machine type other than the current machine. Select OK to continue, or CANCEL to fail the DLL load.
ERROR_RECEIVE_PARTIAL
707 (0x2C3)
{Partial Data Received} The network transport returned partial data to its client. The remaining data will be sent later.
ERROR_RECEIVE_EXPEDITED
708 (0x2C4)
{Expedited Data Received} The network transport returned data to its client that was marked as expedited by the remote system.
ERROR_RECEIVE_PARTIAL_EXPEDITED
709 (0x2C5)
{Partial Expedited Data Received} The network transport returned partial data to its client and this data was marked as expedited by the remote system. The remaining data will be sent later.
ERROR_EVENT_DONE
710 (0x2C6)
{TDI Event Done} The TDI indication has completed successfully.
ERROR_EVENT_PENDING
711 (0x2C7)
{TDI Event Pending} The TDI indication has entered the pending state.
ERROR_CHECKING_FILE_SYSTEM
712 (0x2C8)
Checking file system on %wZ.
ERROR_FATAL_APP_EXIT
713 (0x2C9)
{Fatal Application Exit} %hs.
ERROR_PREDEFINED_HANDLE
714 (0x2CA)
The specified registry key is referenced by a predefined handle.
ERROR_WAS_UNLOCKED
715 (0x2CB)
{Page Unlocked} The page protection of a locked page was changed to 'No Access' and the page was unlocked from memory and from the process.
ERROR_SERVICE_NOTIFICATION
716 (0x2CC)
%hs
ERROR_WAS_LOCKED
717 (0x2CD)
{Page Locked} One of the pages to lock was already locked.
ERROR_LOG_HARD_ERROR
718 (0x2CE)
Application popup: %1 : %2
ERROR_ALREADY_WIN32
719 (0x2CF)
ERROR_ALREADY_WIN32
ERROR_IMAGE_MACHINE_TYPE_MISMATCH_EXE
720 (0x2D0)
{Machine Type Mismatch} The image file %hs is valid, but is for a machine type other than the current machine.
ERROR_NO_YIELD_PERFORMED
721 (0x2D1)
A yield execution was performed and no thread was available to run.
ERROR_TIMER_RESUME_IGNORED
722 (0x2D2)
The resumable flag to a timer API was ignored.
ERROR_ARBITRATION_UNHANDLED
723 (0x2D3)
The arbiter has deferred arbitration of these resources to its parent.
ERROR_CARDBUS_NOT_SUPPORTED
724 (0x2D4)
The inserted CardBus device cannot be started because of a configuration error on "%hs".
ERROR_MP_PROCESSOR_MISMATCH
725 (0x2D5)
The CPUs in this multiprocessor system are not all the same revision level. To use all processors the operating system restricts itself to the features of the least capable processor in the system. Should problems occur with this system, contact the CPU manufacturer to see if this mix of processors is supported.
ERROR_HIBERNATED
726 (0x2D6)
The system was put into hibernation.
ERROR_RESUME_HIBERNATION
727 (0x2D7)
The system was resumed from hibernation.
ERROR_FIRMWARE_UPDATED
728 (0x2D8)
Windows has detected that the system firmware (BIOS) was updated [previous firmware date = %2, current firmware date %3].
ERROR_DRIVERS_LEAKING_LOCKED_PAGES
729 (0x2D9)
A device driver is leaking locked I/O pages causing system degradation. The system has automatically enabled tracking code in order to try and catch the culprit.
ERROR_WAKE_SYSTEM
730 (0x2DA)
The system has awoken.
ERROR_WAIT_1
731 (0x2DB)
ERROR_WAIT_1
ERROR_WAIT_2
732 (0x2DC)
ERROR_WAIT_2
ERROR_WAIT_3
733 (0x2DD)
ERROR_WAIT_3
ERROR_WAIT_63
734 (0x2DE)
ERROR_WAIT_63
ERROR_ABANDONED_WAIT_0
735 (0x2DF)
ERROR_ABANDONED_WAIT_0
ERROR_ABANDONED_WAIT_63
736 (0x2E0)
ERROR_ABANDONED_WAIT_63
ERROR_USER_APC
737 (0x2E1)
ERROR_USER_APC
ERROR_KERNEL_APC
738 (0x2E2)
ERROR_KERNEL_APC
ERROR_ALERTED
739 (0x2E3)
ERROR_ALERTED
ERROR_ELEVATION_REQUIRED
740 (0x2E4)
The requested operation requires elevation.
ERROR_REPARSE
741 (0x2E5)
A reparse should be performed by the Object Manager since the name of the file resulted in a symbolic link.
ERROR_OPLOCK_BREAK_IN_PROGRESS
742 (0x2E6)
An open/create operation completed while an oplock break is underway.
ERROR_VOLUME_MOUNTED
743 (0x2E7)
A new volume has been mounted by a file system.
ERROR_RXACT_COMMITTED
744 (0x2E8)
This success level status indicates that the transaction state already exists for the registry sub-tree, but that a transaction commit was previously aborted. The commit has now been completed.
ERROR_NOTIFY_CLEANUP
745 (0x2E9)
This indicates that a notify change request has been completed due to closing the handle which made the notify change request.
ERROR_PRIMARY_TRANSPORT_CONNECT_FAILED
746 (0x2EA)
{Connect Failure on Primary Transport} An attempt was made to connect to the remote server %hs on the primary transport, but the connection failed. The computer WAS able to connect on a secondary transport.
ERROR_PAGE_FAULT_TRANSITION
747 (0x2EB)
Page fault was a transition fault.
ERROR_PAGE_FAULT_DEMAND_ZERO
748 (0x2EC)
Page fault was a demand zero fault.
ERROR_PAGE_FAULT_COPY_ON_WRITE
749 (0x2ED)
Page fault was a demand zero fault.
ERROR_PAGE_FAULT_GUARD_PAGE
750 (0x2EE)
Page fault was a demand zero fault.
ERROR_PAGE_FAULT_PAGING_FILE
751 (0x2EF)
Page fault was satisfied by reading from a secondary storage device.
ERROR_CACHE_PAGE_LOCKED
752 (0x2F0)
Cached page was locked during operation.
ERROR_CRASH_DUMP
753 (0x2F1)
Crash dump exists in paging file.
ERROR_BUFFER_ALL_ZEROS
754 (0x2F2)
Specified buffer contains all zeros.
ERROR_REPARSE_OBJECT
755 (0x2F3)
A reparse should be performed by the Object Manager since the name of the file resulted in a symbolic link.
ERROR_RESOURCE_REQUIREMENTS_CHANGED
756 (0x2F4)
The device has succeeded a query-stop and its resource requirements have changed.
ERROR_TRANSLATION_COMPLETE
757 (0x2F5)
The translator has translated these resources into the global space and no further translations should be performed.
ERROR_NOTHING_TO_TERMINATE
758 (0x2F6)
A process being terminated has no threads to terminate.
ERROR_PROCESS_NOT_IN_JOB
759 (0x2F7)
The specified process is not part of a job.
ERROR_PROCESS_IN_JOB
760 (0x2F8)
The specified process is part of a job.
ERROR_VOLSNAP_HIBERNATE_READY
761 (0x2F9)
{Volume Shadow Copy Service} The system is now ready for hibernation.
ERROR_FSFILTER_OP_COMPLETED_SUCCESSFULLY
762 (0x2FA)
A file system or file system filter driver has successfully completed an FsFilter operation.
ERROR_INTERRUPT_VECTOR_ALREADY_CONNECTED
763 (0x2FB)
The specified interrupt vector was already connected.
ERROR_INTERRUPT_STILL_CONNECTED
764 (0x2FC)
The specified interrupt vector is still connected.
ERROR_WAIT_FOR_OPLOCK
765 (0x2FD)
An operation is blocked waiting for an oplock.
ERROR_DBG_EXCEPTION_HANDLED
766 (0x2FE)
Debugger handled exception.
ERROR_DBG_CONTINUE
767 (0x2FF)
Debugger continued.
ERROR_CALLBACK_POP_STACK
768 (0x300)
An exception occurred in a user mode callback and the kernel callback frame should be removed.
ERROR_COMPRESSION_DISABLED
769 (0x301)
Compression is disabled for this volume.
ERROR_CANTFETCHBACKWARDS
770 (0x302)
The data provider cannot fetch backwards through a result set.
ERROR_CANTSCROLLBACKWARDS
771 (0x303)
The data provider cannot scroll backwards through a result set.
ERROR_ROWSNOTRELEASED
772 (0x304)
The data provider requires that previously fetched data is released before asking for more data.
ERROR_BAD_ACCESSOR_FLAGS
773 (0x305)
The data provider was not able to interpret the flags set for a column binding in an accessor.
ERROR_ERRORS_ENCOUNTERED
774 (0x306)
One or more errors occurred while processing the request.
ERROR_NOT_CAPABLE
775 (0x307)
The implementation is not capable of performing the request.
ERROR_REQUEST_OUT_OF_SEQUENCE
776 (0x308)
The client of a component requested an operation which is not valid given the state of the component instance.
ERROR_VERSION_PARSE_ERROR
777 (0x309)
A version number could not be parsed.
ERROR_BADSTARTPOSITION
778 (0x30A)
The iterator's start position is invalid.
ERROR_MEMORY_HARDWARE
779 (0x30B)
The hardware has reported an uncorrectable memory error.
ERROR_DISK_REPAIR_DISABLED
780 (0x30C)
The attempted operation required self healing to be enabled.
ERROR_INSUFFICIENT_RESOURCE_FOR_SPECIFIED_SHARED_SECTION_SIZE
781 (0x30D)
The Desktop heap encountered an error while allocating session memory. There is more information in the system event log.
ERROR_SYSTEM_POWERSTATE_TRANSITION
782 (0x30E)
The system power state is transitioning from %2 to %3.
ERROR_SYSTEM_POWERSTATE_COMPLEX_TRANSITION
783 (0x30F)
The system power state is transitioning from %2 to %3 but could enter %4.
ERROR_MCA_EXCEPTION
784 (0x310)
A thread is getting dispatched with MCA EXCEPTION because of MCA.
ERROR_ACCESS_AUDIT_BY_POLICY
785 (0x311)
Access to %1 is monitored by policy rule %2.
ERROR_ACCESS_DISABLED_NO_SAFER_UI_BY_POLICY
786 (0x312)
Access to %1 has been restricted by your Administrator by policy rule %2.
ERROR_ABANDON_HIBERFILE
787 (0x313)
A valid hibernation file has been invalidated and should be abandoned.
ERROR_LOST_WRITEBEHIND_DATA_NETWORK_DISCONNECTED
788 (0x314)
{Delayed Write Failed} Windows was unable to save all the data for the file %hs; the data has been lost. This error may be caused by network connectivity issues. Please try to save this file elsewhere.
ERROR_LOST_WRITEBEHIND_DATA_NETWORK_SERVER_ERROR
789 (0x315)
{Delayed Write Failed} Windows was unable to save all the data for the file %hs; the data has been lost. This error was returned by the server on which the file exists. Please try to save this file elsewhere.
ERROR_LOST_WRITEBEHIND_DATA_LOCAL_DISK_ERROR
790 (0x316)
{Delayed Write Failed} Windows was unable to save all the data for the file %hs; the data has been lost. This error may be caused if the device has been removed or the media is write-protected.
ERROR_BAD_MCFG_TABLE
791 (0x317)
The resources required for this device conflict with the MCFG table.
ERROR_DISK_REPAIR_REDIRECTED
792 (0x318)
The volume repair could not be performed while it is online. Please schedule to take the volume offline so that it can be repaired.
ERROR_DISK_REPAIR_UNSUCCESSFUL
793 (0x319)
The volume repair was not successful.
ERROR_CORRUPT_LOG_OVERFULL
794 (0x31A)
One of the volume corruption logs is full. Further corruptions that may be detected won't be logged.
ERROR_CORRUPT_LOG_CORRUPTED
795 (0x31B)
One of the volume corruption logs is internally corrupted and needs to be recreated. The volume may contain undetected corruptions and must be scanned.
ERROR_CORRUPT_LOG_UNAVAILABLE
796 (0x31C)
One of the volume corruption logs is unavailable for being operated on.
ERROR_CORRUPT_LOG_DELETED_FULL
797 (0x31D)
One of the volume corruption logs was deleted while still having corruption records in them. The volume contains detected corruptions and must be scanned.
ERROR_CORRUPT_LOG_CLEARED
798 (0x31E)
One of the volume corruption logs was cleared by chkdsk and no longer contains real corruptions.
ERROR_ORPHAN_NAME_EXHAUSTED
799 (0x31F)
Orphaned files exist on the volume but could not be recovered because no more new names could be created in the recovery directory. Files must be moved from the recovery directory.
ERROR_OPLOCK_SWITCHED_TO_NEW_HANDLE
800 (0x320)
The oplock that was associated with this handle is now associated with a different handle.
ERROR_CANNOT_GRANT_REQUESTED_OPLOCK
801 (0x321)
An oplock of the requested level cannot be granted. An oplock of a lower level may be available.
ERROR_CANNOT_BREAK_OPLOCK
802 (0x322)
The operation did not complete successfully because it would cause an oplock to be broken. The caller has requested that existing oplocks not be broken.
ERROR_OPLOCK_HANDLE_CLOSED
803 (0x323)
The handle with which this oplock was associated has been closed. The oplock is now broken.
ERROR_NO_ACE_CONDITION
804 (0x324)
The specified access control entry (ACE) does not contain a condition.
ERROR_INVALID_ACE_CONDITION
805 (0x325)
The specified access control entry (ACE) contains an invalid condition.
ERROR_FILE_HANDLE_REVOKED
806 (0x326)
Access to the specified file handle has been revoked.
ERROR_IMAGE_AT_DIFFERENT_BASE
807 (0x327)
An image file was mapped at a different address from the one specified in the image file but fixups will still be automatically performed on the image.
ERROR_EA_ACCESS_DENIED
994 (0x3E2)
Access to the extended attribute was denied.
ERROR_OPERATION_ABORTED
995 (0x3E3)
The I/O operation has been aborted because of either a thread exit or an application request.
ERROR_IO_INCOMPLETE
996 (0x3E4)
Overlapped I/O event is not in a signaled state.
ERROR_IO_PENDING
997 (0x3E5)
Overlapped I/O operation is in progress.
ERROR_NOACCESS
998 (0x3E6)
Invalid access to memory location.
ERROR_SWAPERROR
999 (0x3E7)
Error performing inpage operation.
Categories: ,

0 komentar:

Posting Komentar